+86 512 6665 2013 / +86 18251166131
Time：2018-06-19
Item | Property | Value | Unit | Test Method |
Physical | Density | 1.2 | g/cm3 | ISO 1183 |
Haze | 30±3 | % | ASTM D1003 | |
Light Transmission | >89 | % | ASTM D1003 | |
Mechanical | Tensile Strength | 60 | MPa | ISO 527 |
Elongation | >100 | % | ISO 527 | |
Bend Strength | 91 | MPa | ISO 178 | |
Tensile Modulus | 2300 | MPa | ISO 178 | |
Surface tension | ≥34 | dyn／cm | Test fluid | |
Electrical | Dielectric Constant | 3 | - | IEC60250 |
Resistant Puncture Voltage | 30 | MV/mm | IEC 60243 | |
Surface resistivity | 1.00E+16 | Ω/square | IEC 60093 | |
Volume resistivity | 1.00E+17 | Ω-cm | IEC 60093 | |
Thermal | Coefficient of Thermal Expansion | 5.8 | ×10-5/℃ | ISO 11359 |
Thermal Conductivity Rate | 0.2 | W/(m*K) | ASTM D5470 | |
Thermal Shrinkage | 0.5～0.7 | % | ASTM D1204 | |
Tg | 152 | ℃ | ISO306 | |
Flammability | Grade of resistant flame | V-2/VTM-2 | E249605 | |
Tip: This test data is for reference only, not as an absolute application index.
PC Film
| Model | size of metric system | size of british system | Packing Standard | ||
Thickness | Width×Length | Thickness | Width×Length | ||
omay-G11 | 0.125 | 927×400 | 0.005″ | 3′×1312′ | Roll |
1220×400 | 4′×1312′ | ||||
0.175 | 927×350 | 0.007″ | 3′×1148′ | ||
1220×350 | 4′×1148′ | ||||
0.200 | 927×325 | 0.008″ | 3′×1066′ | ||
1220×325 | 4′×1066′ | ||||
0.250 | 927×300 | 0.010″ | 3′×984′ | ||
1220×300 | 4′×984′ | ||||
0.300 | 927×250 | 0.012″ | 3′×820′ | ||
1220×250 | 4′×820′ | ||||
0.375 | 927×200 | 0.015″ | 3′×656′ | ||
1220×200 | 4′×656′ | ||||
0.500 | 927×150 | 0.020″ | 3′×492′ | ||
1220×150 | 4′×492′ | ||||
Previous： IMD11
Next： No More!